Metalworking Fluids by Jerry P. Byers (English) Hardcover Book

This book summarizes the latest technologies related to metalworking fluid development. All chapters are updated and 2 new chapters on rolling of metal flat sheets and nanoparticle lubricants in metalworking are added.

It includes new data on chemistry of most common metalworking fluids, advances in recycling, and government regulations. This revised and expanded Third Edition contains 21 chapters summarizing the latest thinking on various technologies relating to metalworking fluid development, laboratory evaluation, metallurgy, industrial application, fluid maintenance, recycling, waste treatment, health, government regulations, and cost/benefit analysis. All chapters of this uniquely comprehensive reference have been thoroughly updated, and two new chapters on rolling of metal flat sheets and nanoparticle lubricants in metalworking have been added. This must-have book for anyone in the field of metalworking includes new information on chemistries of the most common types of metalworking fluids, advances in recycling of metalworking fluids, and the latest government regulations, including EPA standards, the Globally Harmonized System being implemented for safety data sheets, and REACH legislation in Europe. Jerry Byers was the President of STLE from 2012 to 2013, and has been active in the organization for over 35 years.

He recently retired from Milacron's Cimcool Industrial Fluids Division after 42 years with the company. His last position there was as Manager of Research and Development. He received his Bachelors degree in Chemistry from Ball State University, and a Masters degree in Chemistry from the University of Cincinnati.

He is a Certified Metalworking Fluid Specialist CMFS (R). He held several offices in the Cincinnati section of STLE, including Chairman. He holds a patent for a heavy duty chlorine-free metalworking fluid, has spoken at conferences world-wide, authored several journal articles, and was contributing editor for two books: Metalworking Fluids (Marcel Dekker, 1994), and Metalworking Fluids, Second Edition (Taylor & Francis, 2006).

Full Contents Introduction: Tracing the Historical Development of Metalworking Fluids - Jeanie S. McCoy Metallurgy for the Non-metallurgist with an Introduction to Surface Finish Measurements - James E. Denton Metal Cutting Processes - Dr. Salmon Using Metalworking Fluids in Grinding Processes - Dr. Salmon Metalforming Applications - Kevin H. Tucker Metal Rolling - Carl S. Kennedy The Chemistry of Metalworking Fluids - Dr.

Neil Canter Nano Cutting Fluids - Dr. Vamsi Krishna Pasam Laboratory Evaluation of Metalworking Fluids - Jerry P.

Byers Corrosion: Causes & Cures - Dr. Becket Microbiology of Metalworking Fluids - Dr. Passman Filtration Systems for Metalworking Fluids - Robert H. Brandt Metalworking Fluid Management and Troubleshooting - Gregory J. Foltz Recycling of Metalworking Fluids - John M.

Cross Waste Treatment Processes - John M. Gaines Contact Dermatitis and Metalworking Fluids - Dr.

Toby Mathias, MD Health and Safety Aspects in the Use of Metalworking Fluids - Dr. White Generation and Control of Mist from Metal Removal Fluids - Dr. James D'Arcy Government Regulations Affecting Metalworking Fluids - Dr. White Costs Associated with the Use of Metalworking Fluids - Lloyd J.

Like the first and second editions which have steadfastly served as'The Bible' for the metalworking industry, the third edition will likewise continue this tradition. This is the only truly comprehensive, all-encompassing reference for this industry. This well-written book should be on the highly recommended reading list for anyone interested in the metalworking industry.

STLE is proud to have partnered with CRC Press (Taylor & Francis Group) in co-publishing this important book. Gresham, Society of Tribologists and Lubrication Engineers, Zionsville, Indiana, USA This third edition incorporates the latest technology and newest thinking into the book that has been the unquestioned standard of the metalworking-fluid industry since its very first printing. It can be used as a valuable introduction to metalworking-fluid technology for those new to it, as well as a useful review and expansion of knowledge for experienced personnel. " -Alan Eachus, Independent Consultant, Villa Park, Illinois, USA "Now, the Third Edition has been developed, with updates, applied science, and topics regarding fluid management and costs. I have no doubt it will be widely accepted and eagerly sought for labs and libraries from industry, to academia.

" - Karen Rich Eisenhauer, Integrilube, Bonita Springs, Florida, USA "This book is an excellent compilation of many years' experience of the foremost industry experts. It is comprehensive and thorough in scope and makes for very interesting reading.

" -Don Smolenski, Retired from General Motors, Grosse Pointe, Michigan, USA "This book provides a good overview of the chemistry and applications of metalworking fluids and should be a mandatory reference for anyone involved in the formulation, testing and application of MWFs, as well as those supplying raw materials to the industry. It is also a good reference in preparing for the Certified Metalworking Fluid Specialist exam, sponsored by STLE. Brutto, ANGUS Chemical Company, Buffalo Grove, Illinois, USA This book has done nothing but improve with each iteration. It is relevant to the industry and my questions are always answered with researching within the previous books. This book is a true industry bible.

I have visited the top MWF manufacturers and they all have this book on site as a key reference. -Marcia Fournier, Metal Working industry for 32+ years, Ann Arbor, Michigan, USA. Like the first and second editions which have steadfastly served as''The Bible'' for the metalworking industry, the third edition will likewise continue this tradition.

" --Alan Eachus, Independent Consultant, Villa Park, Illinois, USA "Now, the Third Edition has been developed, with updates, applied science, and topics regarding fluid management and costs. " -- Karen Rich Eisenhauer, Integrilube, Bonita Springs, Florida, USA "This book is an excellent compilation of many years'' experience of the foremost industry experts. " --Don Smolenski, Retired from General Motors, Grosse Pointe, Michigan, USA "This book provides a good overview of the chemistry and applications of metalworking fluids and should be a mandatory reference for anyone involved in the formulation, testing and application of MWFs, as well as those supplying raw materials to the industry. " --Marcia Fournier, Metal Working industry for 32+ years, Ann Arbor, Michigan, USA hus, Independent Consultant, Villa Park, Illinois, USA "Now, the Third Edition has been developed, with updates, applied science, and topics regarding fluid management and costs. -Marcia Fournier, Metal Working industry for 32+ years, Ann Arbor, Michigan, USA working Fluid Specialist exam, sponsored by STLE.

-Marcia Fournier, Metal Working industry for 32+ years, Ann Arbor, Michigan, USA. Publisher Taylor & Francis Inc.

Country of Publication United States. Series Manufacturing Engineering and Materials Processing.

Illustrations 53 Tables, black and white; 5 Illustrations, color; 256 Illustrations, black and white. Affiliation Retired, Manager of CIMOOL (R) Research and Development; Past President, Society of Tribologists and Lubrication Engineers; Certified Metalworking Fluid Specialist CMFS (R).

At The Nile, if you're looking for it, we've got it. This item is in the category "Books, Comics & Magazines\Textbooks, Education & Reference\Adult Learning & University". The seller is "the_nile_uk_store" and is located in this country: GB.

This item can be shipped to United Kingdom.

ISBN-13: 9781498722223
Book Title: Metalworking Fluids
ISBN: 9781498722223
EAN: 9781498722223
Publication Year: 2017
Type: Textbook
Format: Hardcover
Subject Area: Mechanical Engineering
Language: English
Publication Name: Metalworking Fluids
Item Height: 254mm
Author: Jerry P.

Byers
Publisher: Taylor & Francis
Item Width: 178mm
Item Weight: 1293g
Number of Pages: 515 Pages