13mm Ceramic Fibre Blanket Kiln Insulation Raku Furnace Forge Pizza Oven 96kg

13MM CERAMIC FIBRE BLANKET ALTERNATIVE BODY SOLUBLE. THIS LISTING IS FOR 1 X ROLL OF 13 MM THICK X 12.5 MTS IN LENGTH X 610MM WIDE 96 KG/M3 DENSITY. CAN BE USED TO CREATE A HOME MADE RAKU KILNS, FURNACES AND FORGES. Excellent Insulation For Wood Fired pizza Ovens. Easily Doubled up to give 26mmThick.

Or Trebled to give 39mm Thick. Keeping the heat in your oven to make it more fuel effective. WE KEEP A LARGE STOCK OF INSULATION BOARDS AND BLANKETS IN DIFFERENT THICKNESSES AND DENSITIES. PLEASE MESSAGE US WITH YOUR DETAILS AND WE WILL BE HAPPY TO HELP.

THIS PRODUCT CAN BE RIGIDIZED TO INCREASE THE RESISTANCE TO EROSION. RIGIDIZERS HELP TO PROTECT THE EXPOSED SURFACE OF FIBRE PRODUCTS AGAINST HIGH GAS VELEOCITY SUCH AS TURBULENCE. RIGIDIZER IS AVAILABLE IN 5 LTR CONTAINERS. Blankets are lightweight needled blankets manufactured from alkaline earth silicate wool and provide effective solutions to a variety of thermal management problems. Blankets are completely inorganic and so retain their strength, flexibility and thermal properties in many working environments, without the generation of smoke or fumes. Available in a range of density and thickness combinations. Blankets can be used in a wide variety of applications and are especially suited to use as high temperature wraps and heat shields. GENERAL CHARACTERISTICS Blankets products have the following outstanding characteristics. High temperature stability (up to 1200°C). Good sound absorption TYPICAL APPLICATIONS? Cogeneration and power plant duct linings. Pipe, duct and chimney insulation. Gas and oil fired water heaters. Electric storage heaters: Ceramic Blanket as side and top insulation. Catalytic heaters: Blanket as support medium for the catalyst. Wood-fired fireplace kits: Ceramic Blanket as insulation of upper section (Cheminees in France). Double-skinned chimneys: Blankets for filling between inner and outer sections. Cooker Insulation: Blanket as primary insulation in full size and table-top ovens and cooking ranges.

Dispatched same day if ordered before 2pm. Ceramic Fibre Blankets products have the following outstanding characteristics. DATA SHEET AVAILABLE ON REQUEST. Body soluble means that the fibres can be dealt with and absorbed by your body when they are inhaled rather than sticking around to make life unpleasant at a later date.

Recommended Operating Temperature 1260ºC (2300ºF). Specific Gravity 2.54 g/cm³. Isofrax 1260C Fibre is produced on the Unifrax Corporation's SEF furnaces which utilise a proprietary. Mechanical spinning process and the latest process control technology. Results in the following typical product parameters for Isofrax 1260C Fibre.

Chemical Analysis (%) SiO2 - 72 to 77. MgO - 19 to 26.

Trace Elements - 0 to 4. Average Fibre Diameter (microns) 3.0 to 4.5. Fibre Index (%)² 40 to 50. Packing 20 kg or 40lb bags.

Data are average results of tests conducted under standard procedures and are subject to variation. Should not be used for specification purposes. The following table summarises the insulation characteristics of Isofrax 1260C Fibre note that this. Analysis is based on 256 kg/m3 (16 pcf) vacuum formed board produced with Isofrax 1260C Fibre. Insulation Thickness 25mm (1") 51mm (2") 102mm (4") 203mm (8").

Hot Face Cold face (°C/°F) Cold face (°C/°F) Cold face (°C/°F) Cold face (°C/°F). 650ºC (1202°F) (150/301) (103/218) (71/161) (52/126). 870ºC (1598ºF) (205/401) (142/287) (98/207) (68/154).

1100ºC (2012ºF) (267/511) (187/368) (128/262) (87/189). All heat flow calculations are based on a surface emissivity factor of 0.90, an ambient temperature of 27ºC.

(80ºF) and zero km/h (mph) wind velocity, unless otherwise stated. (1) The recommended operating temperature of Isofrax 1260C Fibre is determined by irreversible. Linear change criteria, not melting point. (2) Fibre Index is measured using the conical elutriation method. (3) Settle volume is a measurement used to indicate the physical dimensions i.

A larger number of indicates the fibre has larger physical dimensions, such as diameter and/or. This item is in the category "Crafts\More Crafts\Metalworking/ Metal Crafts". The seller is "potteryprouk" and is located in this country: GB.

This item can be shipped to United Kingdom.

Modified Item: No
Country/Region of Manufacture: United Kingdom
MPN: 71111
Unit Type: Unit
Craft Type: Metal Working
Unit Quantity: 12.5 mts
Brand: Isofrax
Featured Refinements: Furnace