Contact with STAHLWERK Welding Machines. TIG AC/DC Welders with Pulse & Plasma Cutting. ARC-Stick, Alu welding, Plasma cutting up to 12 mm. TIG AC/DC Welders with Pulse. TIG DC Welders with Pulse & Plasma Cutting.
MMA ARC-Stick, Plasma cutting up to 12 mm. TIG DC Welders with Plasma Cutting. MMA ARC-Stick, Plasma cutting up to 14 mm.
TIG DC Welders with Pulse. Cutting up to 12-40 mm. DC MIG, MAG, TIG, MMA ARC-Stick. Over 100000 satisfied customers in Germany, Europe and Switzerland.
Test welding & plasma cutting: convince yourself of our high quality! STAHLWERK MIG 135 M IGBT. Welding device for daily mobile use.
MIG (GMAW) welding with shielding gas and electrode. Adjustable functions and important device elements. MIG / MAG welding machines are used for metal arc welding, in which a protective or mixed gas protects the weld against the harmful effects of oxidation.A high working speed, low warpage and clean seams, which only require minor rework, make MIGMAG welding machines particularly efficient and economically profitable. Gasless FLUX CORED WIRE MIG MAG WELDING is possible with all our MIG ST IGBT welding machines. During MIG / MAG welding, the wire electrode is automatically unwound from the spool and pushed by a wire feed unit through a several meter-long hose packages to the power contact tube in the torch.
IGBT Technology for all our ST models we rely on the powerful IGBT transistors, which are used in the power engineering of our ST devices. The advantages are high blocking voltage and robustness. MMA/ARC-Stick Electrode welding can be used under almost all conditions and therefore MMA welding can be described as a universal process in the welding industry. Anti-Stick -function prevents sticking of the stick electrode. In the case of a sticking of the electrode to the workpiece, the welding current is switched off.ARC Force with spray arc, also called ARC Force. This allows to regulate the arc range. Hotstart automatic voltage increase at start-up for better welding results. Smart Cooling Fast cooling fan allows maximum power consumption and increases the operating time (ED) of the unit. Overheat protection starts as soon as the unit is overloaded. A yellow indicator light turns on and goes out as soon as the unit has cooled down again. The welding machine is connected directly to the single-phase alternating current (AC) 230 V (+ -15%), 50/60 Hz operation. The single-phase alternating current is to be protected in the household with a 16 A fuse. ST-Guard-Housing is ergonomic, robust and operationally reliable: - Sturdy sheet steel housing, - Shock-proof, - Hard plastic formwork, - Control panel conveniently accessible and easier to operate, - Intelligent fan guide. Excellent quality due to fully digital inverter technology.
The welding machine MIG 135 M IGBT has the most advanced inverter technology IGBT (Insulated Gate Bipolar Transistor). The resultant special features such as high speed and precision of the control give the devices their excellent quality in welding and cutting. Checkliste MIG MAG / MMA ARC. The following equipment is necessary to start your welding work: - gas bottle argon 4.6 - pressure regulator (available in our shop) - connection tube with clamps - wire roll 1 kg, Ø 0,6 - 0,8 mm (available in our shop) - filling wire roller / FLUX (available in our shop) - MIG MAG Contact Tips Ø 0,6 - 0,8 mm (available in our shop) - weldingrods for MMA / ARC (available in our shop) - welding helmet (available in our shop) - protective clothing: gloves, arm splash protection, gowns, safety shoes (available in our shop).
Furthermore, we recommend the following equipment: - holder for welding torch (available in our shop) - magnetic welders corner (available in our shop) - MIG wear parts set (available in our shop). Professional machine for daily use MIG/ MAG and MMA welding. Power - MIG/MAG adjustable between 10-135 A. MMA adjustable between 10-135 A. DC welding machine - For non-alloyed and low alloy steels, stainless steel, copper, brass and so on.Not for light metals, e. Gas cooled Hose package gas air cooled. The long-lasting design and the demanding welding properties of the machines ensure a reliable daily use for the production welding work. ST-Guard housing robust and reliable.
Shock-proof - Robust steel-sheet housing - Hard plastic casing protects against damage - High ED (duty cycle) by intelligent fan control - Intelligent housing design with optimized airflow. Modern housing shape - The control panel is clear and ergonomic at the front - All settings are comfortable, accessible and easier to operate - Comfortable setting of the welding parameters via function selection and control dial - Ergonomically arranged operating elements allow for high-quality welding processes and lead to an optimal working results. Safety degree of protection by enclosure IP21. Protected against solid foreign material with a diameter of 12,5 mm or more - Protection against touch: Protected against access with a finger - Protection against water: Protection against dripping water.
MIG/MAG welding Partial mechanical metal arc welding (MSG), optionally as MIG (metal welding with inert gases, EN ISO 4063: process 131) or MAG welding (metal welding with active, reactive gases, EN ISO 4063: process 135) is an arc welding process The melting welding wire is continuously fed by a variable speed motor. The usual welding wire diameters are between 0.8 and 1.2 mm (less than 1.6 mm). At the same time as the wire feed, the protective or mixed gas is fed to the welding site via a nozzle with approx. 10 l / min (firing formula: protective gas flow rate 10 l / min per mm of welding wire diameter). This gas protects the liquid metal under the arc from oxidation, which would weaken the weld.In the case of metal-based gas welding (MAG), either pure CO2 or a mixed gas of argon and small amounts of CO2 and O2 (Corgon) are used. Depending on their composition, the welding process (baking, droplet size, splash losses) can be actively influenced; In the case of metal inert gas welding (MIG), argon is used as rare gas, more rarely also the expensive noble gas helium. The MAG process is primarily used in steels, while the MIG process is preferred for non-ferrous metals. Optionally welding cored wires, also known as tube welding wires, can be used for metal arc welding (with active gas welding EN ISO 4063: process 136, with inert gas EN ISO 4063: process 137). These can be provided in the interior with a slag former and optionally alloying additives.
They serve the same purpose as the caps of the stick electrode. On the one hand, the ingredients contribute to the sweat volume, on the other hand they form a slag on the welding bead and protect the seam against oxidation. The latter is particularly important in the welding of stainless steels, since the oxidation, the "tarnishing" of the seam must be prevented even after the torch has been advanced and thus the protective gas bell has been passed on. MMA / ARC-Stick electrodes Hand welding The great advantage of electric welding is that the materials do not have to be preheated and can be welded directly to the desired positions.
It is also possible to connect workpieces of different thickness without problems. For example, a 10 x 10 mm square steel can be welded with a 3 mm sheet. In practice, such connections are constantly present, for example in the construction of a railing, in the manufacture of a fence or in the repair of agricultural machines, where heavy U-shaped profiles are often welded with thinner parts.The widest field of application of electrode welders is, of course, in industry, in the craft sector, in DIY and construction. The control technology fits different Applications and greatly improves the welding performance. MIG/MAG MIG / MAG welding machine works with a melting welding wire, which is continuously tracked by means of a motor. In order to adjust the thrust speed, the amount of abrading filler material can be adjusted variably by the user. MIG welding uses inert, non-reactive gases, and active gases are used in MAG welding. Welding voltage regulator Welding Voltage regulator of the welding wire is regulated in the material to be welding. DC DC direct current (deutsch: Gleichstrom). For non-alloyed and low alloy steels, stainless steel, copper, brass and so on. All our MIG welding machines are also suitable for MMA / E-hand welding. Anti-stick Shortly before the end, the system releases the set maximum current, which prevents sticking and annealing of the electrode.
The electrode does not glow and can easily be detached from the workpiece. ARC force With spray arc, also called ARC force, can be regulated the arc width. Hotstart Prevents the sticking of the stick electrode by short-term superimposition of the set welding current and warms up the weld seam start faster. Overheat protectio Overheat protection goes on when the unit is overloaded.
0,6- 0,8 mm. Degree of protection by enclosure. 230 V AC (+-15%) / 1 (single-phase).4,8 (MIG) /5,1 (MMA) 1. Dimensions Length x Width x Height (mm). The machine STAHLWERK MIG 135 M IGBT. MIG MAG torch package 2 meter. Cable with electrode holder 3 meter. This is free for you.
We want to avoid transport damage. Although both packages leave our house at the same time, in some cases, the machine comes first and the accessories are delivered one day later. This is not the rule, but it happens. We deliver free of charge to Germany, EU and UK. In our Shop you will find everything about welding and cutting equipment includes stick welders, TIG welders, MIG welders, multi-process welders, plasma cutters, also welding accessories and welding protective clothing.
The Company STAHLWERK Schweißgeräte Deutschland e. We are your professional and reliable welding specialist. In STAHLWERK welding machines you have the latest inverter technology. Highest quality standards in a premium brand and low prices to a product-performance-ratio. With which process you also weld or cut AC, DC, MIG MAG, MMA or CUT the STAHLWERK products range leaves nothing to be desired.In particular, it relates to the circuit board and the inverter. It does not extend to the housing and its external components and connecting parts, such as the hose pack or the mass clamp. It also does not extend to the supplied accessory, which is not used in the device interior. In order to ensure optimum support for our customers, our very motivated employees are always available to answer any questions.
Our employees are constantly trained and updated to the latest state of technical developments. This is a service that you can also personally convince yourself of here at any time. Visit us - We would like to invite you to a test welding in our company at Bonn. Convince yourself of our service!
Sample welding on site possible. The item "Welder STAHLWERK MIG MAG 135 M IGBT SHIELDING GAS & FLUX GASLESS CORED WIRE" is in sale since Tuesday, January 15, 2019. This item is in the category "Business, Office & Industrial\Metalworking/Milling/Welding\Welding & Soldering\Welding\Welders, Cutters & Torches\MIG Welders".
The seller is "*www.stahlwerk-schweissgeraete.de*" and is located in London. This item can be shipped to European Union member countries.