Contact with STAHLWERK Welding Machines. TIG AC/DC Welders with Pulse & Plasma Cutting.
ARC-Stick, Alu welding, Plasma cutting up to 12 mm. TIG AC/DC Welders with Pulse.
TIG DC Welders with Pulse & Plasma Cutting. MMA ARC-Stick, Plasma cutting up to 12 mm.TIG DC Welders with Plasma Cutting. MMA ARC-Stick, Plasma cutting up to 14 mm. TIG DC Welders with Pulse. Cutting up to 12-40 mm.
DC MIG, MAG, TIG, MMA ARC-Stick. Over 100000 satisfied customers in Germany, Europe and Switzerland. Test welding & plasma cutting: convince yourself of our high quality! Ideal for welding aluminium and thin metal sheets. Direct current- and alternating current TIG welding.
TIG Pulse-function - for thin sheets from 0.8 mm. STAHLWERK AC/DC TIG 170 ST IGBT Pulse.AC / DC TIG welding devices with pulse function are suitable for welding almost all materials (steel, stainless steel including aluminum). Adjustable functions and important device elements. AC/DC WIG welding direct current- and alternating current. Welding of almost all materials (also aluminium). IGBT Technology for all our ST models we rely on the powerful IGBT transistors, which are used in the power engineering of our ST devices.
The advantages are high blocking voltage and robustness. HF Ignition high-frequency ignition (HF) by TIG - TIG High Frequency.
Reproducible welding results by HF ignition and constant welding parameters at start-up. Gas pre-flow protects the tungsten electrode from excessive wear and protects the weld seam for oxidation.
Gas post-flow protects the tungsten electrode from excessive wear and protects the weld seam for oxidation. With the switch 2T/4T the operating modes oft he control can be determined. This mode provides extended control over the current flow.
Down slope prevents piping (end craters) at the end of the weld. After the button on the burner has been released, the machine switches to an automatic current lowering phase. Downslope works only in 4T mode.
TIG PULSE - Prevents the burning of materials and reduces deformation due to heat. TIG-PULS function is particularly suitable for welding thin plates, the material of which may be heated only slightly. MMA/ARC-Stick Electrode welding can be used under almost all conditions and therefore MMA welding can be described as a universal process in the welding industry. Anti-Stick -function prevents sticking of the stick electrode. In the case of a sticking of the electrode to the workpiece, the welding current is switched off.ARC Force with spray arc, also called ARC Force. This allows to regulate the arc range. Hotstart automatic voltage increase at start-up for better welding results. High Performance Cooling through two high-speed fans. Fast cooling fan allows maximum power consumption and increases the operating time (ED) of the unit. Overheat protection starts as soon as the unit is overloaded. A yellow indicator light turns on and goes out as soon as the unit has cooled down again. The single-phase alternating current is to be protected in the household with a 16 A fuse. The welding machine is connected directly to the single-phase alternating current (AC) 230 V (+ -15%), 50/60 Hz operation. ST-Housing is ergonomic, robust and operationally reliable: - Sturdy sheet steel housing, - Shock-proof, - Control panel conveniently accessible and easier to operate, - Intelligent fan guide. Professional machine for daily use AC DC TIG with pulse function and MMA / ARC-Stick welding.
Power - TIG / MMA adjustable between 10 170 A. AC DC welding machine For non-alloyed and low alloy steels, stainless steel, copper, brass etc. As well as for light metals for example aluminum.
Gas cooled Hose package gas air cooled. Excellent quality due to fully digital inverter technology The welding machine AC DC 170 ST PULSE has the most advanced inverter technology IGBT (Insulated Gate Bipolar Transistor). The resultant special features such as high speed and precision of the control give the devices their excellent quality in welding and cutting. The long-lasting design and the demanding welding properties of the machines ensure a reliable daily use for the production welding work. S-Guard housing robust and reliable.Robust steel-sheet housing - Hard plastic casing protects against damage - Shock-proof - High ED (duty cycle) by intelligent fan control - Intelligent housing design with optimized airflow. Modern housing shape - The control panel is clear and ergonomic at the front - All settings are comfortable, accessible and easier to operate - Comfortable setting of the welding parameters via function selection and control dial - Ergonomically arranged operating elements allow for high-quality welding processes and lead to an optimal working results. Safety degree of protection by enclosure IP21. Protected against solid foreign material with a diameter of 12,5 mm or more - Protection against touch: Protected against access with a finger - Protection against water: Protection against dripping water. Inverter welding machine The welding inverter is an electronic welding current source.
Inverter welding machines are built for all arc welding processes such as electrode, MIG/MAG, plasma and TIG welding. Depending on the power, the devices are connected one or three phases to the electric circuit. Excellent quality due to fully digital inverter technology The welding machine AC DC 170 PULSE S has the most advanced inverter technology IGBT (Insulated Gate Bipolar Transistor).
The control technology fits different Applications and greatly improves the welding performance. AC DC AC alternating current (deutsch: Wechselstrom). For light metal, for example aluminum and so on. Used for break-up of the oxide film from the surface of aluminum and the filler metal DC direct current.
DC direct current (deutsch: Gleichstrom). For non-alloyed and low alloy steels, stainless steel, copper, brass and so on. TIG (tungsten inert gas) is one of most important welding for processing of high-alloy steel and all non-ferrous metals. HF high-frequency ignition High frequency arc ignition (HF) at TIG. A High frequency removal advance the sparking distance between the electrode and the workpiece.
There is no direct contact between the tungsten electrode and the workpiece. The tungsten electrode does not touch the work piece so the tungsten will be prevented and the weld is not exposed any tungsten attack.Touchless ignition works in different work configurations with high reliability. Gas pre-flow Adjustable between 0 2 seconds.
Protects the tungsten electrode from excessive wear and protects the weld from oxidation. Gas post flow Adjustable between 1 10 seconds. Important to protect the welding seam from aeration and to create a gas atmosphere. 2T / 4T In the 2 stroke mode, the button of the TIG hose pack must remain pressed.When the button is released, the arc goes out. At 4 stroke mode, after pressing and releasing the button of the TIG hose pack, the arc remains stable. The arc is extinguished only by pressing the torch again.
Note: In the 4T mode, the set welding current is not displayed until the display is activated. That device has some features "Start current", "Closing current", "Current rise" and "Current reduction" which can only be used in 4T mode. Slope down (Current reduction) The current reduction prevented end crater at the end of the weld. After the button is released, the machine switches to an automatic current reduction phase. During this phase, the current is lowered from the set value for welding current into the closing current.The duration of this phase is adjustable from 0 to 10 seconds. Down Slope can only be set by 4 stroke mode (4 T). Welding with pulsating current a further development of TIG welding. Pulse TIG pulse function is particularly suitable for welding thin plates, the material of which may be heated only slightly. The increased arc stability allows better welding precision.
With this function you can weld deeper into the workpiece (10mm) without getting to hot. A burning of the workpiece is prevented and a clean and stable weld is the result. Pulse width Adjustable between -5 +5.
Fine adjustable control of the distance between the impulsing. In TIG pulse welding, the welding current pulsates between a basic and pulse current with variable frequencies, base- and impulse height and width. Due to the strong pulse current a deep penetration is ensured. Due to a weak background current, the weld pool becomes smaller and easier to control. All our TIG welding machines are also suitable for MMA / E-hand welding.
Anti-stick Shortly before the end, the system releases the set maximum current, which prevents sticking and annealing of the electrode. The electrode does not glow and can easily be detached from the workpiece. ARC force With spray arc, also called ARC force, can be regulated the arc width. Hotstart Prevents the sticking of the stick electrode by short-term superimposition of the set welding current and warms up the weld seam start faster. Overheat protectio Overheat protection goes on when the unit is overloaded.Duty cycle MMA / ARC. 40 % at 170 A. Degree of protection by enclosure. 230 V AC (+-15%) / 1 (single phase). > 6,1 kVA / 1. Dimensions Length x Width x Height (mm). 430 x 210 x 380. The machine STAHLWERK AC/DC WIG 170 ST IGBT PULSE. TIG Torch Package "WP-26" 4,5 m. TIG accessories (installed them each one piece already in the hose package). 4 gas nozzles, each 1 piece in size 4,5,6,7. 4 adapter sleeves, each 2 pieces in 1,6 and 2,4. 4 collet body, each 2 pieces in 1,6 and 2,4. Cable with electrode holder, 3 meter.
Das Video wird zur Zeit gedreht und steht für Sie in Kürze zur Verfügung. > 4,9 kVA / 1. TIG Torch Package "WP-26" 3 m. Cable with electrode holder 3 meter. This is free for you.We want to avoid transport damage. Although both packages leave our house at the same time, in some cases, the machine comes first and the accessories are delivered one day later. This is not the rule, but it happens.
In our Shop you will find everything about welding and cutting equipment includes stick welders, TIG welders, MIG welders, multi-process welders, plasma cutters, also welding accessories and welding protective clothing. The Company STAHLWERK Schweißgeräte Deutschland e. We are your professional and reliable welding specialist. In STAHLWERK welding machines you have the latest inverter technology. Highest quality standards in a premium brand and low prices to a product-performance-ratio.With which process you also weld or cut AC, DC, MIG MAG, MMA or CUT the STAHLWERK products range leaves nothing to be desired. In particular, it relates to the circuit board and the inverter. It does not extend to the housing and its external components and connecting parts, such as the hose pack or the mass clamp. It also does not extend to the supplied accessory, which is not used in the device interior. In order to ensure optimum support for our customers, our very motivated employees are always available to answer any questions. Our employees are constantly trained and updated to the latest state of technical developments. This is a service that you can also personally convince yourself of here at any time. Visit us - We would like to invite you to a test welding in our company at Bonn. Convince yourself of our service! Sample welding on site possible. The item "WELDER STAHLWERK AC/DC TIG 170 ST IGBT PULSE PROFI INVERTER WELDING MACHINE" is in sale since Saturday, May 5, 2018. This item is in the category "Business, Office & Industrial\Metalworking/Milling/Welding\Welding & Soldering\Welding\Welders, Cutters & Torches\Multiprocess Welders & Cutters". The seller is "*www.stahlwerk-schweissgeraete.de*" and is located in London. This item can be shipped to European Union member countries.